Refer to the DS. Check that the units are on the same channel. Possible values are 2, 5. The required antenna gain depends on the required range and performance. The link is too long. Verify power to units.
| Uploader: | Aralar |
| Date Added: | 8 November 2005 |
| File Size: | 38.60 Mb |
| Operating Systems: | Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X |
| Downloads: | 47645 |
| Price: | Free* [*Free Regsitration Required] |
Extended coaxial cables can cause an increase in signal configueation and a reduction in range. System Name - The name of the selected unit. Without the filter, it depends on the resulting converted 2.
Flat Panel Directional Antenna The community strings are reset to the default values, private Write and public Read. It is possible for the RB-DS. The other is to press and uttility the reset button on the back of the unit while powering on the unit.
Alvarion BreezeNET DS.11 Configuration Utility Manuals
A point-to-point link would realize about 3mS latency. The first LED lights red to indicate that the unit is working. Connect the Indoor-to-Outdoor cable to the outdoor unit and route it to the location selected for the indoor unit. Relocate the link to a clear path or raise the antennas above any objects. Remove the two screws holding the waterproof seal to the outdoor unit and remove the waterproof seal.
The Ds Configuration Utility - Alvarion BreezeNET DS User Manual [Page 41]
Shielded RJ Ethernet Indoor units: Select the units that you wish to upgrade from the list box on the lefthand side of any dialog box tabs. Clearance — Path loss is minimized when there exists breezeet clear line of sight.
Collocating more then four units may decrease performance depending upon the type of antenna and its direction.
The remaining bredzenet LEDs light green to indicate the signal strength. Remember that all settings including IP addresses will be lost when setting defaults.
Antenna height is the distance from the imaginary line connecting the antennas at the two sites to ground level. Unit configuration - This is the default mode and is used for setting parameters as detailed in this manual. Outdoor Installation Considerations Information brwezenet this document is subject to change without notice. The default value is Smart.
Apply — Implements any changes you made. With this utility you can breeezenet link parameters and monitor signal quality and RSSI received signal strength indication.
The description in this manual, however, is limited to management and configuration of BU-DS. What is the best value for the CW min parameter on the DS.
Trap quick view - When set to this mode, the PC switches automatically to the Trap Monitor tab when Unit Configuration mode is selected. Corporate and individual names and data used in examples herein are fictitious unless otherwise noted.
Confirm that the units at both ends of the link are receiving power.
BreezeNET DS Broadband Wireless Bridging
Path Loss Path loss is determined mainly by several factors: The utility can be used to manage BU-DS. The cable is supplied open ended so it can be conveniently threaded as shown into the bgeezenet.
Multiple Unit Configuration Mode This feature allows configuration parameters to be downloaded to multiple units simultaneously. For example, in a heavily utilized network needing about Kbps to kbps average net throughput per site, 9 to 12 RB-DS.
No comments:
Post a Comment